-
This looks like a bug (alfred firmware sends left, right encoder values and serial robot drivers receives them as right, left encoder values):
https://github.com/Ardumower/Sunray/blob/6afe8502d9281…
-
**Describe your use case**
I am using a [`spinningBodyOneDOFStateEffector`](https://github.com/AVSLab/basilisk/blob/6f12949e6477cec6a03ffcd1de012fef40deec49/src/simulation/dynamics/spinningBodies/spi…
-
- **ev3dev version:** 4.14.117-ev3dev-2.3.5-ev3
- **ev3dev-lang-python version:**
||/ Name Version Architecture Description
+++-==========…
-
Got GTR and M5 working together.
GTR has
3x 5160 for XYZ (SPI)
3x 2208 for E123 (UART)
M5 has
3x 2208 for E456 (SPI)
2x 5160 for X2/Z2 (UART)
Termistors on GTR work fine.
Termistors rea…
-
### ArcticRover firmware version
0.97.07
### Area(s) with issue?
Hardware Issue
### Steps to reproduce
Enable motor driver power, Enable motor Primary power.
### ✔️ Expected Behavior
Motors rep…
MadsR updated
2 years ago
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
2.1.1, 2.2.0 RC
### Operating System (OS)
Windows, Linux 24.04
### O…
-
The target of this project is an executing Embox on Raspberry Pi board.
There are some OS which support Raspberry platform. Most of them based on Linux kernel and don't suit for real-time application…
-
XOutput crash on start if installed gamepad driver, without gamepad driver all ok. But with the drivers, the vibration motor should work, but the program does not start with them.
https://user-imag…
-
What is the status of this driver?
- Is it working for both servo and stepper motors?
- Any known issues?
- What models does it work with?
- Are there plans to move it to the epics-motor proje…
-
I would like to set up my Bigtreetech SKR v1.3 with TMC2208 drivers to use Z1 and E1 steppers to control my two Z motors to take advantage of Z motor leveling in Marlin 2.0. Can you do this and does a…