-
I'm using F35 Lightning with 1.9 INAV fw. In 1.9 we changed lib to MPU9250, all software on Android or IOS cannot detect this sensor. 1.8 with MPU6500 no problem.
@digitalentity can you help us ch…
-
I've been trying for days to get the GPS working with my Omnibus F4 V2.1 clone purchased from Banggood. https://www.banggood.com/BF3_1_5-Omnibus-F4-V2-Flight-Controller-STM32-F405-MCU-Integrated-OSD-B…
-
When using DMA-enabled SPI and using the Tx channel ISR (`DMA1_Channel3_IRQn`), the data that received from the MPU seems to be shifted by 4 bytes.
If I disable the interrupt and instead just wait …
-
I just flashed the 2.1.0 RC1 version to Matek F722 and using DALRC 40A 4 in 1 ESC, It works very well in Multishot, but not in Dshot, My drone goes crazy and vibrating too much when fly 1 meter above …
-
Hi all. I'm still relatively newish to all of this but thought I would just make you aware of a problem I came across. After flashing betaflight for the first time on one of my micro quads and quite l…
-
this SW is really great - experience / testing on a SP F3evo board: the GPS_HOLD mode starts after some time to drift
drift is in position and altitude
I have experienced this 2 times - 1:26 min and 1…
-
### If your issue looks like a hardware fault or a configuration problem please don't raise an issue here.
### Please consider using other user support options such as asking the manufacturer of th…
-
I just finish my first Inav build, it is a cloudsurfer from HK with Matek F722 FC, and Inav 1.9.1 (recommended version from mateksys, with fixed issue of rudder output -S06). On the ground it looks j…
-
Greeting,
I am trying to enable the `USE_RX_MSP` feature for my Matek F722 FC.
In order to to this I have tried to build my own custom firmware by adding `#define USE_RX_MSP` to the target.h fil…
-
With pins PB12-PB15.
[Datasheet](https://www.invensense.com/wp-content/uploads/2015/02/MPU-6500-Datasheet2.pdf).
[Register map](https://www.invensense.com/wp-content/uploads/2015/02/MPU-6500-Regis…
Peque updated
6 years ago