-
 forces air through a filter into a sealed mask to protect workers; here’s a DIY version designed by physician Randell Vallero MD using a 5V computer fan, HEPA…
-
Hi, thank you for publish this great project.
I want to ask how to save the face mesh after using demo_mask.ipynb?
Thank you.
-
I replaced the LNet model with a retrained wav2lip model, and at step 6, it is giving an error like this:
[Step 6] Lip Synthesis:: 0% 0/13 [02:26
-
Respirators and face masks need at least two straps, in order to properly balance pressure along the entire seal. Based on your initial strap attachment, I have made a 'K-Strap' that fits on a 200mm …
-
### Search before asking
- [X] I have searched the Ultralytics YOLO [issues](https://github.com/ultralytics/ultralytics/issues) and found no similar bug report.
### Ultralytics YOLO Component
Pred…
-
The first stage (sync) uses the lower half of the face, while the second stage (wav2lip) uses the lower half of the face and mask_ Margin=8, will these two different data processing methods affect the…
-
Some of the imaging data is very large and of higher resolution than what we need for building an average template.
Would be useful to have utilities for cropping and for downsampling/resizing images…
-
Hi, I found there are some white edges of masks on faces. And how to eliminate this unexpected phenomenon? Thanks~
-
Thank you for such great work.
Is it possible that I run this model to get segmentation for BOTH face and hair as in the attached picture?
Many thanks
sos
![48294893-bc640b80-e4ca-11e8-81d0-7f…