-
```
Currently the ParticleEmitter class only supports setting start/end values for
colors and size. Instead the emitter should support setting "animation tracks"
or "ramps" or "gradients" for these …
-
More questions from a n00b, sorry. There are references to servo settings in the processing sketch and in the RepRap firmware, but it's not obvious to me how to hook up the servo to my RAMPS
-
When I set the temperature to 140°C the PCB ramps up to 225°C (even starting to smoke).
Is this intended?
I measured with NTC probe and IR-Thermometer.
-
What is the right value for the capacitors C11, C12, C13, C14, C15 and C16? These capacitors are for the endstops and not on the regular ramps. I think it is the same value as on C2 (100 nF).
Pleas…
3DSTB updated
5 years ago
-
If you find yourself laying out a new revision, can you add support for powered end stops, these are very common on 3D printers and can be had for pennies, they include all the filters at the switch e…
-
```
Currently the ParticleEmitter class only supports setting start/end values for
colors and size. Instead the emitter should support setting "animation tracks"
or "ramps" or "gradients" for these …
-
```
Currently the ParticleEmitter class only supports setting start/end values for
colors and size. Instead the emitter should support setting "animation tracks"
or "ramps" or "gradients" for these …
-
```
Currently the ParticleEmitter class only supports setting start/end values for
colors and size. Instead the emitter should support setting "animation tracks"
or "ramps" or "gradients" for these …
-
So i'm sorry if it's already answer because i didn't find it, i just got the code and i don't understand how to build ramps where the character can surf.
thanks for your help in advance !
-
Configurably prevent users from using things like danger rooms, cage traps, walling themselves in, selling prepared food and other over-valued products, etc.
- [ ] Disable Cage Traps
- [ ] Disable Wal…