-
Hey cpopp, I'm trying to built this arm, using an esp8266, and mg995 servos, But having an issue with servos not responding, only ticking. This is the first time I've tried to use the mg995 on the chi…
-
```
The following features still need to be implemented:
1. ls baud - list, with baud rate change
2. set param index value - set a parameter (position, speed, tuning)
3. get param index - get a param…
-
i'm noticing regularly occurring when using one or more servos
the irregularities seem like two types: 1) communication drop outs (some messsages missed, it then keeps going, 2) freak out (servo must…
-
I see this as a fixed wing thing.
I currently fly sailplanes with several different flight modes that affect the aileron centers through camber adjustment, and reactively the H-Stab center. I use …
-
### Description
[This tutorial](https://moveit.picknik.ai/main/doc/how_to_guides/controller_teleoperation/controller_teleoperation.html#launch-file) says:
> The file that launches this example i…
-
I couldn't seem to get it to work properly with the GPIO test:
https://wokwi.com/projects/412403579090783233
It appears to turn the PWM either always-on or always off as expected, but if you cha…
drf5n updated
2 weeks ago
-
Nice addition to Espurna is mechanical servo (pwm step motors) support...
I've implemented Servo support (as a 3'rd party plugin to begin with),
1. Using Relay switches to set predefined positions…
-
I'm trying to get this tracker software to work with a 360 degrees servo, no luck so far.
the servo only spins faster and faster.
can 360 servo support please be added if possible ?
-
either running average or do interpolation/fade between present pos and target
-
hello,
i am using grbl version 0.9 to make a cnc plotter with 2 steppers and 1 servo. the servo is connected to pin d11 of arduino uno. the servo is not working at all only a buzz like sound comes so…