-
Attempting to compile STM32F4xx for Bigtreeteck SKR2 I get the following errors:
Using platformio:
.pio/build/btt_skr_2_tmc5160/src/driver.o: In function `driver_init':
driver.c:(.text.driver_init+…
-
Hi! i have some problem, i tried it on a teensy 4.1 and does nothing, it holds the shaft strongly, if i try to turn it i can see changes on the serial out, should i wire the step and dir pins? you did…
-
Hi,
First at all, thankyou for sharing your exceptional knowledge.
I've recently removed a burned duet+ duex from my printer and mounted a Octopus Pro F429.
In my old configuration I was able to ad…
-
Please, before you create a new question, please make sure you searched in open and closed issues and couldn't find anything that matches.
Will there be a stealth Mode known from the mk3 in future …
-
I'm trying to get this library to work on the Raspberry Pi Pico using earlephilhower's core but it just does nothing. I initially was trying to use hardware SPI but that did nothing so I changed to th…
-
i have a problem with my tmc5160 extruder.
it starts the print fine but after a while it stops and dump tmc shows some weird stuff.
before error:
![image](https://user-images.githubusercontent.…
-
hello
I have 2 tmc2208 for X and Y with uart and a tmc 5160 v1.2 from bitreetech in spi on a SKR1.3
![Capture2](https://user-images.githubusercontent.com/8688892/67150512-93dab900-f2b8-11e9-96dd-509…
Akex2 updated
2 years ago
-
Feature request: TMC5160 support.
bdn76 updated
2 years ago
-
Hello, I am bench testing a https://www.tindie.com/products/33366583/6-pack-universal-cnc-controller/ for a CNC router with tmc5160, and 5mm pitch ballscrews.
I would like to have full step, due to…
-
Hi,
is in any way possible with the current hardware and maybe some "hacking" to supply the trinamic drivers with a 48V input power, to drive higher impedance motors with higher speeds?
when opening…