-
Hello.
I find your repository and it works very well for my nano 33ble sense.
I would like to use it on other mpu 9dof and also on a 6 dof sensor.
Could you split lsm9 config in specific .h and .cp…
-
There is no readout from ICM20948.
* Product page: https://www.waveshare.com/imx219-83-stereo-camera.htm
* Product wiki: https://www.waveshare.com/wiki/IMX219-83_Stereo_Camera
-
You can't have it both ways. Your website says this is "open hardware", but then in issue sparkfun/SparkFun_DataLogger#2 you're saying it's closed source.
You should issue refunds to the pe…
-
It appears that the datalogger does not recognize the M8Q as it does not show up as a device along with the other 3 built-in devices. I updated the datalogger to firmware version 01.00.02 which did no…
-
Navgauge uses its own 'universal' format for sending basic navigation data to the browser. 'universal' and 'basic' mean that data from different sources (NMEA 0183, N2K, different sources within a N2K…
-
### Subject of the issue
using "Conf WiFi", the displayed web form does not display stored/retrieved value for Ethernet HTTP Port (should be default 80) - it is empty. Even if not changing "Ethernet …
-
Hi Clarius Engineers,
When the Clarius Ultrasound App released v 10.3.0, I calibrated my probes and was successful with both the stationary and motion calibrations in the beginning of May.
Howe…
-
We have this IMU sensor and we have a rasberry pi 4 Model B. Installed Lineage OS on it (https://konstakang.com/devices/rpi4/LineageOS20/). We want to install drivers for this sensor to work with our …
-
notes on connecting and working with the ICM20948 IMU:
Connections:
| IMU | TX2 |
|--------|--------|
| VIN | 1,2,4 |
| GND | 6,9,14,20,...|
| SDA | 3 |
| SCL | 5 |
use the example in [th…
-
Hi,
I tried to change the full scale settings of the accelerometer in the arduino Example2_Advanced code and it did not seem to work.
I am using ICM20948 with SPI communication.
myFSS.a = gpm8…