-
```
1.All appears OK up to Visualiser as described
2.Shorting pins as shown seems to do nothing
3.Running "Turn into a joystick" gives the fault
AtLibUsbDFU.dll not found
Device manager (Ports)show…
-
```
What steps will reproduce the problem?
1. Select the Firmware tab and press the Enter DFU Mode button
2. Choose iPhone1,1_1.0.2_1C28_Restore Folder
3. press ok
What is the expected output? What…
-
Hi,
i've got error with new bootloader and klipper firmware with S6 board.
Firmware uploaded using STM32cube and DFU.
Sequence:
1. Enter DFU Mode
2. Upload Latest bootloader
3. Restart Board …
-
The "Arduino_LED_Matrix" library's "TextWithArduinoGraphics" example has a dependency on the "ArduinoGraphics" library:
https://github.com/arduino/ArduinoCore-renesas/blob/4606b85cb13142eb30117368a…
-
The Adafruit nRF52 Feather with the nrf52832 chip (but _not_ the nrf52840) requires a bootloader update to be compatible with the Adafruit BSP included here. The bootloader includes an update for the …
-
Following HOWTO.md, I compiled pongo on a macbook (intel macbook pro running macOS 11.6.5) and booted into pongoOS using checkra1n 0.12.4, on an iPhone 6 running iOS 12.5.6. Here's the output from che…
-
#### Issue details
If I load the latest dfu-file from the latest zip folder from the copter folder (f4light_AirbotV2_bl.dfu : 930 KB) in MP baro/altitude isnt't active (it appears just a fixed num…
-
For remote management and DFU support.
-
I'm looking for some info regarding DFU mode, usualy boot + reset then release reset. on that board version we have boot 0 and boot 1 so which one one i need to use for klipper ? No information with…
-
Got an issue report from FC660C Alt controller user.
> The instructions (https://github.com/tmk/tmk_keyboard/wiki#flash-firmware) say in step #5 to either re-plug the USB cord OR click Start Applicat…