-
### Describe the bug
On recent main (early April), when optical flow is enabled with EKF2_OF_CTRL but no optical flow or distance sensor is given, while in Position mode the vehicle will experience…
-
### Issue details
Segfault on startup causing mavros_node to die.
Problem is only seen on Raspberry Pi 3, doesn't happen on laptop.
Problem is intermittent, happens approximately 70% of the tim…
JMare updated
2 years ago
-
## Expected Behavior
When logs are listed they should be readable
## Current Behavior
The first column (log id) runs over the top of the 2nd column (date/time) if there are more than 100 logs.
…
-
### Describe the bug
I’m currently working on a project where I need to enable Pixhawk to receive MAVLink v2 framed messages. However, I’m encountering some difficulties in implementing this function…
-
The following template is for Issue/Bug reporting only. https://docs.qgroundcontrol.com/en/Support/Support.html#github-issues
For questions about how to use or build QGC see: http://qgroundcontrol.…
-
The following template is for Issue/Bug reporting only. https://docs.qgroundcontrol.com/en/Support/Support.html#github-issues
For questions about how to use or build QGC see: http://qgroundcontrol.…
-
**Describe the bug**
I would like to stream HIGHRES_IMU and ATTITUDE at 200Hz, but adding these lines in etc/extras.txt results in them streaming at ~160 - 170 Hz:
mavlink start -d /dev/ttyACM0 -b 92…
-
The following template is for Issue/Bug reporting only. https://docs.qgroundcontrol.com/en/Support/Support.html#github-issues
For questions about how to use or build QGC see: http://qgroundcontrol.…
-
The following template is for Issue/Bug reporting only. https://docs.qgroundcontrol.com/en/Support/Support.html#github-issues
For questions about how to use or build QGC see: http://qgroundcontrol.…
-
The following template is for Issue/Bug reporting only. https://docs.qgroundcontrol.com/en/Support/Support.html#github-issues
For questions about how to use or build QGC see: http://qgroundcontrol.…