-
Hi morrownr,
First of all, my sincere thanks for your dedication and commitment for the Linux community, I appreciate it a lot!
After reading your article about recommended USB WiFi adapters, I …
-
### Answers checklist.
- [x] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
## Environment
Development Kit: NodeMCU-ESP-32S
Module or chip used: ESP-WROOM-32
IDF version (run git describe --tags to find it): v4.4-dev-2533-g83956ebbae
Build System: idf.py
Compiler versi…
-
While trying to build the bootloader from source code I'm getting this error:
```
-- Building ESP-IDF components for target esp32
CMake Error at /nuttxspace/nuttx/arch/xtensa/src/esp32/bootloader…
-
- Hardware description: ESP32-S3
- RTOS: FreeRTOS
- Installation type: micro_ros_setup
- Version or commit hash: humble
#### Steps to reproduce the issue
1. Setup ESP-IDF environment variab…
-
[965/988] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/mqttOta.c.obj
FAILED: esp-idf/main/CMakeFiles/__idf_main.dir/mqttOta.c.obj
/home/hassanahmedansari/.espressif/tools/xtensa-esp-elf/…
-
Hej folks,
I've ordered components + PCB for the Yellow AP and put one together today.
Installed firmware through https://install.openepaperlink.de/, which went fine.
Booted, connected to wifi…
-
### Bug Description
The resource job `wifi_interface_mode` parses the wifi interface with the device name starting with `phy`. However, I found that has a different naming rule `mwiphy` on my devic…
-
I could update the firmware after slightly modifying the script.
See https://github.com/danielewood/sierra-wireless-modems/discussions/71 and
[autoflash-7455.sh.txt](https://github.com/danielewood/s…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…