-
I used config json file to save my config. but I rarely sometimes encountered an empty file and I didn't know why.
Until recently this happend when electricity was gone ( or computer is unplugged ).
…
-
Hello,
I've been running the Hilo HA integration for several weeks now, collecting good data on my electricity usage.
I noticed that the Hilo consumption sensor sensor.hilo_energy_total_low (I hav…
-
### Describe the feature you'd like
Add a machine that can produce oxygen in the Overworld by consuming only electricity. Corresponds to the Air separation method of oxygen production in the real w…
-
In [this scenario](https://energytransitionmodel.com/saved_scenarios/17263) I removed all the electricity production capacity from a blank Schiermonnikoog scenario, except for 0.1 MW of solar PV.
I…
-
Hi Andi!
I updated 10 days ago both HA and the Vimar component and I've found that the sensor entity which in the past used to measure the instant electricity consumption is stuck to 2.48 KWh and i…
-
### The problem
The platform: dsmr electricity_failure_log feature produces in my case the following state that is too long for HomeAssistant:
`\r\xe0\xeb\xad\x06\x12\xb3\x02(10)(0-0:96.7.19)(210901…
-
P1 meters in the Netherlands do not report a total consumption or production but this is split into
Consumption low
Consumption high
Production low
Production high
therefore only being able …
-
I'm curious whether I'm doing something wrong, but the [rank-automation.yaml](https://github.com/T3m3z/spotprices2ha/blob/main/blueprints/automation/shf-spotprices2ha/rank-automation.yaml) doesn't wor…
-
## Problem description
PV/T panels generate heat and electricity at the same time, but their yield is not correlated via a constant. For this, I prepared two dataframes, one for electricity generat…
-
Please create a server version of the Idle Miner SW.
Use case:
Idle Miner SW is deployed on a lightweight (Raspberry Pi) server or VPS.
- This server will also (later) act as the EMS, controlling e…