-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
I've a brandnew ESP3D, resolder the pins, so that I can connect the modul on the TFT (BTT) direct.
After call the I received the message, that the index.html.gz is missing, with a link to this side.…
Wesie updated
3 years ago
-
Using Debian Buster, Marlin at commit c28e08c8, running an SKR v1.3 with a brand new RRD 12864 display (BigTreeTech red PCB model with contrast pot, via normal cables that needed no twisting/flipping/…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
```
Marlin/src/lcd/menu/menu_delta_calibrate.cpp: In function 'void _man_probe_pt(const float&, const float&)':
Marlin/src/lcd/menu/menu_delta_calibrate.cpp:42:76: error: 'DEFAULT_XYZ_STEPS_PER_UNIT…
-
### Bug Description
This is Marlin bugfix-2.0.x, commit 0ebd2f44, running on a newly-built Hypercube with SKR v1.4 controller (which has TMC2208's on X, Y, and Z, and A4988 on E) and RepRapDiscount…
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
Hello, the mainly config like below:
```cpp
#define Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP…
-
### Version
1.42.0-Alpha7
### Behavior
I would like a button to add a pause at a specific layer height for embedding objects in 3d prints, possibly a button next to the button that adds a color c…
-
My layer(s) always seem to be tilted on the build plate. With tilt I mean that on the left side the nozzle seems to be too high (1) and the right side too low (2) compared to the middle (0). It doesn'…