-
```
rtucker@prima:~$ bladeRF-cli -i
bladeRF> version
bladeRF-cli version: 0.6.0-git--dirty
libbladeRF version: 0.7.0-git--dirty
Firmware version: 1.5.3-git-465a561-dir…
-
I have made a proposal for a new FX3 firmware flashing strategy, see https://github.com/Nuand/bladeRF/wiki/Proposal-for-new-FX3-firmware-loading . I will begin work on it, but I'd like feedback on th…
-
Use the CLI to automate loading the FPGA via udev rules. Someone wrote a [blog](http://blog.jasonantman.com/2009/11/running-a-script-on-usb-drive-insertion/) about it.
-
Setup as follows
```
[recon@tacoma host]$ sudo yum install libusbx libusbx-devel
Loaded plugins: langpacks
Package libusbx-1.0.16-3.fc19.x86_64 already installed and latest version
Package libusbx-de…
-
The c16_sample_fixup routine should be reviewed for proper endian conversion. Samples coming from the FX3 (little endian) need to be converted to the file format endianness, _NOT_ the host endianness…
jynik updated
11 years ago
-
I'll just say I'm a noob up front both with Ubuntu (Linux) and GNU Radio in general. Although I hold my head in shame because I can get the board to RX and TX using the bladeRF-cli program.
and this …
-
Attempting to load the FPGA code within Fedora 19 fails:
``` bash
[bharrington@leviathan bladeRF]$ bladeRF-cli -p
Backend: libusb
Serial:
USB Bus: 4
USB Addres…
-
When I run the osmosdr-siggen program it appears to properly configure the FPGA and lime chip for the Carrier requested in the GUI. The TX Gain adjusts seems to be working as well. But I can't seem …
ghost updated
11 years ago
-
On my TODO list after higher priority items.
To reproduce:
```
tx config file=/dev/urandom format=csv
tx start
```
jynik updated
11 years ago