-
With the growing frequency of news reports about near misses with manned aircraft we should add warnings to the ground station software when the vehicle (or home location?) is within some certain dist…
-
@julianoes @thomasgubler Issue to track the relevant discussion here:
https://groups.google.com/forum/#!topic/px4users/IC1iz_TsL_Y
For all people interested to send high-rate set points offboard: Wha…
-
Hi All
on APM/Copter 3.2.1 when running Telemetry/GCS as primary flight control with a RCTX setup to allow launching from the tablet(rctx=stab mode with throttle 0)
a loss of autoguided primary f…
-
Description: The UAV should be in communication with human users and notify them of the current battery level. The battery level should be measured on-board the UAV. Once the battery level reaches a…
-
As a safety feature, any significant stick input during AUTO , RTL, or GUIDED mode, should be respected by the APM.
AndKe updated
10 years ago
-
I've seen this issue on both ubuntu 14.04 and windows with the latest 2.5 release.
See attached documents, the failure rate is about 30%. We've tried switching radios as well.
[QGroundController Con…
-
Description: Communication with an off-board PC or remote control is intended to display the real-time UAV flight data, motion planning, and other relevant information to users on the ground, which ma…
-
The new CAM_TRIGG_DIST parameter is a fantastic addition but lacks the ability to activate it over waypoints resulting in excess data. My target site is 2 miles away from my launch site and I don't w…
-
There seems to be an error in
com.droidplanner.dialogs.mission.DialogMissionWaypoint.onSeekBarChanged(). I believe param1 should receive the value returned by delaySeekBar.getValue(). Not param2. I a…