-
There are situations where having additional control target of maximum correction IOB would be useful. One such example is pre workout where BGs are rising fast, and Loop predicts an eventual BG of h…
-
Hi
I have recently got printrun. However, it does not connect to the printer with a marlin firmware installed on a clone of Arduino Mega. What should I do? I run it obviously with sudo pronterface.py…
-
Does `aiohttp` provide functionality to test application written with its HTTP client? It is in the sense of packages like [httpretty](https://pypi.python.org/pypi/httpretty/), [responses](https://pyp…
-
**NOTE 2020-12-11 locked, please continue here: https://github.com/Koenkk/zigbee2mqtt/discussions/5266**
Texas Instruments has recently released a new high performance Zigbee chip: the CC2652R. Thi…
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
Hello again!
I have a feature request and I'm unsure of where else to place this. I've noticed that GodMode9 has full support for dumping the ROM file in either full or trimmed format for DS cartri…
-
I vaguely remember discussing this with Julius but I can't find the conversation in my inbox.
I am used to seeing the function "(an.)amp_follower" being called "peak envelope."
On the other hand…
-
Board|MCU|State|To-Do
-|-|-|-
8-Bit AVR boards, RAMPS, etc.|Arduino AVR|💚good|
Due, RAMPS FD (v2.A!), etc.|SAM3X8E|💚good|
Duet Wifi + X5|SAM3X8E|❓unknown|E3D Toolchanger on hand
Duet 2 Maestro|SA…
-
This is imperative to move forward of our purchase of 10 units.. We need to be able to have the Google ICAL feature to be able to auto scroll the schedule calendar so that a lengthy schedule can be s…
-
Context:
I built an OpenBuild Workbee type Machine
I use an Arduino Due + g2Core to directly (without any shield)
it drive four(4) external stepper motor Drivers (DQ542MA)
I'm using the latest g2C…