-
Hey guys,
very nice project. I worked a lot with Panasonic & other Ac- oder ventilationdevices, but almost on mechanical site.
My company was one of the biggest main supporter of panasonic in nort…
-
I'm using two kwh meter with pulse output connected to heishamon. How this is suppused to function? On v0.9b it added kwh values on previous value and I think it was showing meaningful values. Now on …
-
heishamon.yaml
sensors are giving unknown see picture
i have not changed anything in yaml file all others sensor/switches works perfectly
![image](https://user-images.githubusercontent.com/29598723…
-
Hi friends. I have using heishamon since 0.6 perfectly. The correct received data were always above 95%.
After upgrading to 1.0, I have a correct received data of 36.73%.
Are you experiencing s…
-
Hello
Really a great system!
I have my system integrated with home assistant. The first day i had H76 Communication Error. Solved by disconnecting the Heishamon reconnecting it. Then reset error…
-
As long as I have the "Listen only mode" enabled, I receive 100% correct data.
In MQTT log, I see Total Reads and Total Good Reads with same values.
When I disable Listen Only and reboot, data get…
-
Hi, i have just flashed heishamon on my wemos D1, plugged a level shifting to match voltages with heat pump and got a problem with GPIO15. Having it connected to level shifting part making boot not po…
-
My HP has a Max Pump Duty setting in the standard remote controller.
When I set it very low to e.g. 0x5A (which is 90 decimal), the pump will run at a maximum of around 1950 rpm.
This RPM can be f…
-
I am using my Panasonic J-series Heatpump with external thermostat, connected to the special Thermostat connector on the main PCB. In the installer settings it is set to "External Thermostat". This w…
-
Hi,
I have a Panasonic WH-SDC07F3E5 and unfortunately the connector for CN-CNT isn't soldered on the PCB so I turned to the CN-NMODE connector instead.
I bought [this HeishaMon interface on Tin…