-
Hi. I'm wondering if I could use the neopixel address accessable leds from Adafruit with the artoo-spark library. Adafruit provides their own library for their led strings, rings and matrices. So, wou…
-
Looking at the top right of the first page of https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/raw/master/Circuit/Resources/IoTuz-Schematic.pdf (took me a while to locate them :) ), they do not …
-
- Arduino board: ESP32 Dev Module (ESP32-WROOM)
- Arduino IDE version: 2.3.2
After updating my esp32 board package from 2.0.11 to 3.0.0-alpha I noticed that using the `Adafruit_NeoPixel::show` fu…
-
I am working on a raspberry pi 3+ and I had everything working perfectly until I got to running 'visualization.py'. I tested everything with the 'strandtest.py' from rpi_ws281x and it worked perfectly…
-
is possible use `rpi_ws281x` and `adafruit-circuitpython-neopixel` to control ws2812b rgb led just like raspberry pi?
-
Dear Julian Butler,
This is Tony from China. I appreciate your lavalamp project. It is quit awesome!
I want to make it commercialize, but it is quite expensive(Raspberry Pi 3B+ and Fadecandy ). …
-
Mick,
Thanks for posting this project. We're looking forward to getting this running on our race car. We have a 1991 BMW 325i running the 6 cylinder engine. We've built the board as you specified and…
-
Hi,
I installed everything following the install instruction.
First I got 3 Error messages, that there are missing files.
..\async-mqtt-client-master\src the File "ESPAsyncTCP.h" was missing.
co…
-
from C:\Users\MYHOME\Desktop\MK4duo\MK4duo.ino:352:
sketch\src/core/stepper/driver/driver.h: At global scope:
sketch\src/core/stepper/driver/driver.h:172:11: error: member 'Driver driver_…
-
I have bought Neopixel ring and matrix, both are not working with AMB82-MINI (RTL8735B),
https://www.amebaiot.com/en/amebapro2/
it would be good to see Neopixel working with this EdgeAI MCU (WiFi, B…