-
This may be one of the trickier parts of the design. Because the Pi camera unit is fixed on a ribbon cable (quite delicate) we need a way to make the whole logger unit be able to rotate to face the fi…
-
The anemometer's signal is expected to be under 2V. If this is true, the ADS gain might be able to be set for higher precision. Also, it may be useful to test that the voltage to windspeed mapping in …
-
The install sql file does not create the tables properly during first setup. It appears to be due to a change in the default timestamp format in 5.7.
-
The footprint assigned to plug J7 is an RJ14 plug and not an RJ10.
-
Unique azimuth for cup-and-vane anemometer is not exposed in a user-editable way. It's defined as constant (default: 0) so would be easy to expose through a `ConstTable`.
-
Can we use Anemometer for Oracle ?
-
This sort of thing could cause big problems with the anemometer:
![vortex-street-animation](https://user-images.githubusercontent.com/1386719/27980343-a186a408-6375-11e7-90be-6e682ba25b4d.gif)
-
Fine wire thermocouples to be used with sonic anemometers should have a better reference temperature measurement than the logger panel voltage
-
```
Randoms glitches induced by the Davis anemometer reed relays or by the long
CAT5 cable length.
Need to incorporate a deglitching algorithm in the interrupt routine or try to
change the reed rel…
-
I now have the anemometer running according to the instructions. So far everything is ok. The only thing is that the Wemos D1 goes into sleep mode after a certain time and thus no longer sends any dat…