-
This ticket follows a [discussion](https://forum.rakwireless.com/t/multicast-fail-with-rak3372-node-rak2287-gateway-and-chirpstack-network-server/13437) I had on the RAKwireless forum.
There seems …
-
Hello i have successfully connected my gateway to my local chirpstack and TTN,
i also can get my Rpi gateway to play ping pong with my end node (with mode 1).
now that I change to mode 11 to connect…
-
Before opening a feature request against this repo, consider whether the feature should/could be implemented in the [other OpenTelemetry client libraries](https://github.com/open-telemetry/). If so, p…
-
**Project:**
Helium Arduino PortentaH7 Lora Vision Shield Tutorial for Non-Engineers
**Note:** I have reduced the scope of this grant and removed the Sensor/Actuator and Machine Learning compo…
-
The lora exemples works but the oledexemples dose not work. And vice versa if you down grade to 1.1.5
c:/users/valdt/appdata/local/arduino15/packages/heltec-esp32/tools/xtensa-esp32s3-elf-gcc/esp-1…
valdt updated
7 months ago
-
Board: CubeCell HTCC-AB02S GPS
Version: 1.4.0
Example: LoRaWan_OnBoardGPS_Air530 > https://github.com/HelTecAutomation/CubeCell-Arduino/tree/master/libraries/LoRa/examples/LoRaWAN/LoRaWAN_Sensors/Lo…
-
I'm trying to build [this example](https://github.com/HelTecAutomation/ESP32_LoRaWAN/tree/master/examples/OTAA_OLED) using PlatformIO with the following config:
```ini
[env:heltec_wifi_lora_32_V2]…
-
Currently trying to use this library with the Seeeduino Lorawan which is based on the Cortex M0 (like the Zero) and defined as __SAMD21G18A__ which I see support for in OneWire.h
However I am getti…
-
-
This seems to be the same issue as #90. I have a license key and replaced that into the OTAA.ino file. After programming, the ESP32 is boot looping with the following output:
```
ESP32 MCU init...
…