-
Would be great to see this board supported. Github page: https://github.com/bigtreetech/BTT-Pi
-
good morning
I have a skr1.3 working with tmc2208 uart. I bought some btt tmc2130 spi v3 but I can't make the engines move.
TMC2130 V3.0 SPI Mode
https://www.aliexpress.com/item/32970150483.htm…
-
Hardware:
SKR2 + TMC5160 v1.2 + 24V power supply (17.5A)
Software:
Marlin v2.1.2.1
Issue:
Stepper motors are noisy/vibrate at low, medium and high speeds (30mm/s, 60mm/s, 80mm/s, 120mm/s) whe…
-
Please fix it, it stopped working!!!
-
Hey all
I have an M8P v1.1 with a CB1
I have klipper running along with an EBB36 it’s a fully functional printer. I used Kiauh to install everything. I’ve decided i wanted to add a touchscreen. S…
-
I saw that Eddy is now supported in mainline klipper so figured I'd update everything with the hopes of it resolving some of my z-offset issues.
After rebuilding and flashing klipper for all of my …
-
From Susan Quigley:
BTT Writer does not have the Translation Notes book and chapter intros. These are the intro.md files in the "front" folder for the book and in each chapter folder. Is it possibl…
-
When attempting to compile current Marlin 2.0.9 for my Ender 3 Pro w/ SKR E3 Turbo mainboard to account for adding BTT 12864 screen, autobuild marlin in VSCode displays an error:
In file included fro…
-
我是新人,今天尝试 sextractor,。 解包,写正则都很方便,一直到回填的时候我就不知道该怎么做了。ui和说明里写了*提取/写入*,但是没说明要把翻译后的文件放到 `trans`文件夹里,我一开始以为要自己写回填脚本,但是看issue至少6个提到了SExtractor自己有这个功能。于是重读了好几遍说明才发觉要自己主动移动文件。我觉得这一点可以在说明里提一下, 输出文件夹和译文输入用 `>>…
-
hi guys I wanted to connect the BTT Pico directly to my linux pc via USB port instead of the classic UART method.
Is it possible to use the USB port that we use to install Klipper for data transmissi…