-
This repo adds support for the GD32 series
* GD32E23x (Cortex-M23) via `gd32e23x.cfg`
* GD32VF103 (RISC-V) via `gd32vf103.cfg`
however, there is no dedicdated support for all the other GD32 ARM c…
-
Investigate possible use of the built-in Memory Protection Unit. What is it? How do we use it? When should we use it?
There is a FreeRTOS version that makes use of MPU.
It seems main use is to make …
-
Historically, device headers, eg stm32F303.h, have lines like this:
```
#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
#include "system_stm32f3xx.h" /* STM32F3xx…
-
Hi Emil,
Thank you for your work, the performance is great on Cortex-M0, the best I seen so far.
I was wondering however if there's an easy way to implement public key decompression using intern…
-
I have a Arduino Nano 33 BLE Sense.
For better developing i will using CLion from Jetbrains.
Your scripts are pretty cool😎. This will save me for many hours of CMake configuration.
But the IDE …
-
The STM32h745IIx is a cortex-m7/cortex-m4 dual-core variant.
It appears that unless both cores are up and running "properly" then I cannot get any RTT connection. Attempting to connect fails with `fa…
-
I cross-compile quite a bit for different processors. Cross file layering has been quite helpful, because I can have a common GCC ARM definition, and layer processor-specific flags on as needed.
So…
-
Would it be feasible to add support for the Teensy 3.1/3.2 boards?
Teensy 3 is an Arduino compatible development board. Arduino cor
ARM Cortex-M4, 72 MHz standard, 96 MHz overclocked
64kB RAM
256kB …
-
```toml
[build]
target = "thumbv7em-none-eabi" # Cortex-M4 and Cortex-M7 (no FPU)
target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU)
```
which also requires the u…
-
Uploading to the TM4C129 EMT raises an error
> error: CORTEX_M4_0: Error: Debug Port error occurred.
alhtough the final message says it succeeded.
> Success
* Full log
> Users/ReiVilo/…