-
* Subject: VScotH01 300W Rücklauftemperatur
* Wiki-Page: home
* From: vheat
* Date: Sat, 21 Sep 2013 11:56:23 UT
* Message-ID:
Hat jemand eine Idee, wie man bei der VScotH01 an die Rücklauftemper…
-
Hi,
I would like to have a PWM-output for the heating. I looked in the sources and I found that SupportDistilling activates PWM-output. Is there another way ? I don't need distilling, only the PWM-ou…
-
My spec same above image.
I have success install this driver. But on resource monitor GPU not working.
I play with plex and emby server. CPU is 100% only. GPU not work.
i can use this driver ? Wha…
-
Mariusz,
I have run your application but changed both IP connections to local network (Http server running on my NAS).
After 2,5 hours no error only OK results.
What is your experience ? Also issues…
-
### The problem
Using the KMTronic LAN DS1820 Tiny
Testing as standalone:
1. all of my three dallas device are shown correctly
2. temperature measurement is working.
All looks functioning.
…
-
I would like to know how people are using this software. As I have developed a lot …
-
Crashes when I try to start wspr on a raspberry pi 1. The only way to recover is unplugg the device and plug it back in.
-
I have an impossible problem with an RMT function. Perhaps you have an idea that can help me.
First I used the "OneWire" library for my DS1820. I currently have 4 sensors connected.
In my project I …
-
Hello,
I'm trying to use a temperature sensor DS1822 with different genuine STM32 boards but the code freeze at the boot on all boards.
The same code and the same DS1822 Sensor run well on Arduino b…
-
Hi, I use DS1820 temperature sensor, when temperature_value = -1, -2, -3...... and 100, 101, 102....... accessory starting not to response,
so accessory works only with values from 0 to 100
in my…