-
Hi,
great project, thanks a lot.
I tried setting up a NTRIP Server (base station pushing to caster) but did not really get far.
My Caster server setup look like this:
```
const caster = new Ca…
-
I was wondering if there is any plan to add a feature to send the data (RAW and/or NMEA) direct via network to an IP/TCP/UDP endpoint as well, e.g. in addition or alternative to local logging. I would…
-
After uploading the code I connected to the hotspot, AOG, created by the ESP and entered the SSID and password for my network access point. The ESP failed to connect and is now creates a hotspot with…
-
when this option is selected the COMPASS_EXTERNAL should be set to "1" …
-
This is only bug and feature tracker, please use it
to report bugs or request features.
----
### Issue details
Hi,
I'm working on integrating the Emlid GPS RTK to be used with mavros on a…
-
hello!
i tried to record input data with time tag,and time-tag file is created.However,when i read the log file, rtknavi seems to be failed to get the right time-tag,with a message "(1) + 1071431.9s"…
-
If you have external GPS that is not listed in the [official documentation](https://merginmaps.com/docs/field/external_gps/#list-of-known-supported-gps-devices), please let us know as comment to this …
-
Using Reach View 2.2.5
I have connected 3dr radios to the uart port on the reach. When I start up the reach the two radios lock. The base station is sending corrections. The rover is not saying it …
-
Hello!
The problem is that there are 2 bases that are registered on the caster emlid page.
Regardless, for some reason the connection with the caster emlid is lost. When checked on the web, it …
-
As this chip is connected to the second SPI bus, work will first have to be done to enable this access because the current MS IoT SDK only provides access to the "default" SPI0.