-
F9P with UART1 connected to the serial port of a Raspberry Pi 3B running Raspberry Pi OS. Port shows up as /dev/ttyAMA0
Running ubxtool as a service following the example described here: https://git…
-
Hello,
Thank you for posting this code. I am not yet able to make my C099-F9P board work as a NTRIP Server (ODIN Led does not light up and nothing is sent to RTK2GO). I am wondering if I am compilin…
-
Copter 4.4.4, OrangeCubePlus, Dual Here4 gps.
Logs show spikes in EKF Position innovations, some are close to the error threshold.
IMU0/Lane1 and IMU1/Lane2 shows frequent spikes, but IMU2/Lane3 sho…
-
If I use default ( gps only) config everything work on the galactic branch.
zed_f9p.yaml
gnss:
glonass: True
When I enable glonass I get this error.
`[ublox_gps_node-1] [DEBUG] [16…
-
https://github.com/jancelin/MultiProbeCase/issues/7#issue-1902822878
## context:
To explain this bug I am going to use an RTK rover containing an F9p ublox with a Bluetooth connection thanks to …
-
Hello!
The problem is that there are 2 bases that are registered on the caster emlid page.
Regardless, for some reason the connection with the caster emlid is lost. When checked on the web, it …
-
I am using ZED F9P Ublox and during Kiematic mode I do not get centimeter level accuracy. I collect data in city and my rover and base station has almost 30 km distance Please guide me what I am missi…
-
Quite a few people are using alternative GPS modules, like UM960/UM980/UM982, which speak NMEA instead of UBX. For feature parity, it would be required to re-establish support for NMEA. I'm not sure i…
-
In Xamarin Forms 4.5 you can now embed font resources and use alias to access them.
These do not work on f9p:Label
-
## Feature request
Ublox ZED-F9P and some other boards report a `RELPOSNED` message that contains information about the rover's distance to the RTK base-station. This information is picked up by …