-
Hello.
I built your "beidou-sdr-sim" project on ubuntu and run with limesdr.
Then received simulation signal using another sdr and I couldn't see the spectrum of BOC modulation signal.
But my GNSS …
-
There seems to be a problem with the gnss data sent by the op_fix2pose module. The frame_id is gnss_link, but the coordinates sent should be based on map.
-
### NetBox version
v4.0.3
### Feature type
Data model extension
### Proposed functionality
NetBox does not presently support Coaxial SMA connector types. Notably SM type A and SM Type B typically…
-
In the GPS probe code (
https://github.com/meshtastic/firmware/blob/aae346aef74b72d5914a470d7f19f18bce2f0ec3/src/gps/GPS.cpp#L1137 ), we write commands on the serial line and determine which GPS we h…
-
When examining the "dump" from the GPS_L1_CA_DLL_PLL_Tracking loop, I have noticed that there is an offset in the accumulated carrier phase (acc_carrier_phase_rad) compared to the carrier phase of the…
-
# Budget DIY GPS/GNSS Base Station / Receiver and NTRIP Server Client with ESP32 and UM980
Effortlessly set up a budget DIY GPS/GNSS base station and NTRIP Server / NTRIP Client using ESP32 and the U…
-
Deduplication is the next big feature to implement in jet1090. In addition to opening the way to MLAT, it would also improve scaling, error detection, find signal reflections.
First step is to red…
-
With v1.1 OEM Linux we could rely on gnss-mgr for configuration.
Update config file, issue service reload.
-
Hi,
I'm using the Noetic ROS driver for an SBG Ellipse D.
I would like to stream the PPS signal on "SYNC OUT A" while the device receives RTCM corrections via "SYNC IN B – PORT B RX ODO A."
How…
-
Hello! I have been having issues getting GNSS-SDR to obtain assist data (Almanac, Ephemeris, Iono, and UTC model) through SUPL and was thinking it would be nice if there were another automated alterna…