-
A lot of this is a suite issue. Putting it here for now...
* "System Efficiency" field needs a /100 before given to suite
* "System Efficiency" renamed to "Boiler Efficiency"
* Help for "Boiler Effi…
-
Is there any support for heating/cooling substations, e.g. shunts with recirculation or a heat exchanger, to regulate supply temperature to subsystems and heating/cooling coils. See picture for exampl…
-
Hello, is this heat exchanger fouling prediction calculation method and the corresponding program is not their own copyright, inconvenient to upload ?
-
I tested this in a creative world with an HTGR. If the steam boilers are adjacent to the heat exchanger without any heat pipes, everything works as expected. Using heat pipes to connect the heat excha…
-
If there are underground buildings, the script of solar radiation generates an error.
Currently the workaround is to push those buildings above the ground so CEA is able to account for them.
The r…
-
GSHP sizing is currently not available. I would like to see this allowed for GroundHeatExchanger:Vertical. Some version could also be implemented for GroundHeatExchanger:Pond, GroundHeatExchanger:Surf…
-
## Issue overview
The nominal capacity reported for the fluid to fluid HX appears to be too low. In the defect file, the predefined tablular report shows 600kW, yet during the simulation the device …
-
Based on my observations and guesses, I think the presence of large amounts of heat exchangers used to transfer heat reduces average vent cooling displayed. I remember that you said average vent cooli…
-
**Describe the bug**
When simulating hot water in a pipe via pp.pipeflow(net, mode="all"), the results for velocity and re-Number => lambda and in final consequence the pressure drop have unexpected …
-
My ventilationbox with Heat-Exchange (Dutch: WTW) supports bypassing the heat exchange for hot days (so the heat from the house is not put back into the house).
Also there is a pre-heating option ava…