-
I'm really keen to try this idea on my hot tub. Would it be possible to have some info on how you installed it on yours?
Even if it's just some photos of your setup.
Thanks
-
Is there any way that a function could be added to the integration to us to select the temperature units for the climate entity? I have most of my stuff in Celsius, but I prefer to have my hot tub in …
-
Draft notes:
* Consider room by room, floor by floor
* Might be useful for the weather station and hot tub interface
* https://home.by.me/
* https://www.homestyler.com/floorplan/
* https://www.ro…
-
Great card - many thanks for your work on this
**Is your feature request related to a problem? Please describe.**
At present I can have 2 individual energy consumers attached to the home .. I have…
-
Hi,
Trying to decode my hot tub communication to make it available wireless. From my initial measurements I see the clock cycle is 7-bits and not 8-bit that is standard SPI. I see in the SoftSPIB lib…
-
continuing discussion that started here: https://community.home-assistant.io/t/balboa-hot-tub-spa-automation-and-power-savings/353032/4?u=squirtbrnr
looking at the debug dump, I have an MXBP20. I …
-
Just wanted to, firstly, thank @ccutrer again for all his hard work.
Secondly to report that this code seems to work perfectly with non-Balboa RS485-WiFi adaptors, in my case an Elfin-EW11. After …
-
I have two Spas with Gecko - a hot tub and a Swimspa. I can connect to both, and controls work fine.
However, my Swim Spa has 3 pumps, but only 2 of them are identified by the integration. I should …
-
My install seems to be working and I am getting data into HASS. I see a couple issues maybe someone can help me with.
1. Strange Temp readings. example: Spa says 92 deg F, HASS is showing 46 F. I …
-
Hi,
First, off fantastic work, i got my hot tub last week and wanted to use esphome with HASSIO to monitor and control, you have saved me a lot of work. i found that my unit is the 6 wire version.
…