-
Lora_gateway program running CPU usage reached 100%;
./lora_gateway Starting with a separate gateway or starting with post_processing_gw.py, the CPU usage is almost 100%. I am running on raspiberry 3…
-
This is a question for help.
I have an issue connecting my TTN Kickstarter Gateway to the Thingsnetwork V3 stack.
The gateway has been working for the past years without any issue, however I seem …
-
Hi,
If I look to the specification, the Join Request need to send the JoinEui and the DeviceEui in the "EUI" format
https://lora-developers.semtech.com/build/software/lora-basics/lora-basics-for-gat…
-
Hello prof Pham,
Thank you for your detailed explanations..
I am new to LoRa, I followed your guide to make LoRa gateway using inAir9 + Raspberry PI 3. I am using 915MHz module.
I ran make lora_g…
-
Lack of Documentation and any useful Tutorials. With the exception of a 4 page document describing how to connect to this device using your laptop and a HTTP connection, I was unable to find any usef…
-
I cannot figure out which pins to set for the reset script.
spi and i2c are enabled.
tyro@rpiz:~/LR1302_loraWAN/LR1302_HAL/sx1302_hal/packet_forwarder $ ./reset_lgw.sh start
CoreCell reset thro…
-
Greeting,
I am encountering difficulties with GPS synchronization in the Lora gateway. My hardware setup is: Raspberry Pi 3B+ and SX1302 LoRaWAN Gateway HAT by waveshare. I've successfully connected…
-
We have gateway running on pi, dumb router, openwrt router with mosquitto, cascaded networks (subnetworks), potentially esp based mqtt repeaters, and maybe later some ble/lora/espnow bridging dongles.…
ulno updated
4 months ago
-
I have an miboxer RF 433MHZ Lora
Model WL 433 can i replace this with openmmqqttgateway?
-
Hi,
I'm currently working on a project that involves sending data from SX126x (connected to raspberry pi 4b) to a Mikrotik Lora Gateway and then to ChirpStack. Browsing through multiple docs and pr…