-
Hi,
Since commit f28a22802d24de0c2dd4d023be68d757f018e83b deploy to my MMDVM-Pi fails when trying to upload the firmware.
It appears that this is caused by the -c parameter to stm32flash (resume…
m0vse updated
4 years ago
-
Hi folks.
I have an issue running
> M: 2017-08-13 23:24:37.636 MMDVMHost-20170719 is starting
> M: 2017-08-13 23:24:37.636 Built 00:21:58 Aug 14 2017 (GitID #3749b8d)
and
> I: 2017-08-13 23…
m1geo updated
4 years ago
-
I have this dev board and I am wondering if it would be possible to compile the mmdvm firmware on this:
https://www.st.com/en/evaluation-tools/nucleo-f722ze.html
Thanks for the very large help y…
-
I'm using a repeater with MMDVMHost on raspberry PI3 and Arduino2 without any display.
For the past few months, after the last 2 system updates, at the MMDVM launch the NONE display type is not recog…
-
Hi, I tried to build the code from the main branch and it did without any problem but, if I select the branch for the OLED support the build process fail at apply patch 1. Below you find the error of …
A4EVA updated
3 years ago
-
i would like to see if these could be stored in a file or log that i could grep to find a certain page. i know i could listen to the freq with an sdr and decode the RF but if i could just see in real …
-
Is it just "free as in beer" or is there source code?
-
Hi Jonathan, as a regular user of C4FM, MMDVM and APRS systems. I want to tell you if the current icon and comment that appears automatically in the aprs beacons can be modified by a more efficient an…
-
Currently only one Slave Hytera repeater is supported, allow connecting multiple Slaves and translate all of them to single MMDVM upstream
- [x] Local repeater data pair against source IP address
…
-
MMDVMHost cannot open ttyACM0 device in _daemon_ mode if mmdvm user's _primary_ group is not dialout
workaround: usermod -g dialout mmdvm