-
### Feedback
Would like to see if someone can make integration for the Mopeka Wifi Bridge to work with Home Assistant. The sensor integrations work, but once you move the tanks away from the HA serv…
-
Maybe I'm missing something, but when installing it's asking me for a username/password. I'm trying my Mobilelink u/p, but all I get back is "internal error". But if I enter a bogus password, it seems…
-
### The problem
System does not find Mopeka device in order to add it. I have also tried using esp32 with the mopeka_pro_check installed and i get an "unsupported sensor type" error.
### What ve…
-
### Actual Behavior
I'm trying to configure Genmon to install a Mopeka Pro + sensor
I did:
`sudo python3 serialconfig.py -e -b`
Reboot
`sudo python3 serialconfig.py -c -b`
All ok
`sudo bluetoot…
-
Would it be possible to have tank level readings?
Not only would that help with resistive sensors but we can also use the Cerbo as a bridge to Homey for the Mopeka BT ultra sonic sensors.
-
Hello,
Seeking, input from someone out there that is successfully using the Mopeka Pro+ sensors with Genmon, to compare notes with.
This issue is most likely outside the general scope of Genmon,…
-
### Feedback
The new Mopeka Pro Universal is nor yet supported, it would be very fine to intergrate it, because the old Pro-Plus and Pro-Check versions are not produced any more
### URL
https…
-
### The problem
The Mopeka Pro Check specs show a temperature range of -55 to 140F (-50 to 60C). When the temperature is below 32 deg F, ESPHome reports the temperature as 484F. The Mopeka app displa…
-
Mopeka have release a newer Pro Check Universal Sensor which has many benefits over the existing sensor. Currently this sensor is unrecognised by venus os.
-
These are new and updated sensors that are replacing the current Venus os supported sensors