-
Im Building with Tasmota firmware flashed Plugs a Battery Warning Lamp.
If the battery State is Low send Http command On...
It Would be Nice to have feddback like power measure or states.
and Swi…
-
> 많은 인터넷에 돌아다니는 Google IO에서 발표된 내용들의 정리하고, 한번에 쑤욱 읽고싶었다.
Google IO에 참여하면서 느낀 감회도 있지만- 참석한 만큼 내용을 흡수하고 싶었지만, 너무나 많은 피쳐들에 하나하나 흡수하기도 어려웠고, 하여 당일날 흡수하지 못 한 아쉬움을 여기에서 정리해보려고한다.
개발자로서 관심이 가는 부분들에 대해서 자세히…
-
**Describe the bug**
A clear and concise description of what the bug is.
The gyroscope attitude is reversed
**To Reproduce**
Steps to reproduce the behavior:
I used the firmware version 0.4.3, af…
-
I tried to read the DMX data following the scheme inserted in the LXSAMD21DMX.h file on an Arduino M0 Pro and also on a MKR1000 but the incoming DMX value, also displayed on the Serial Monitor, contin…
-
After upgrading and flashing up to BuF 3.5.0 now only motor #1 is spinning.
From time to time motor 3 will "bulb/shake" a little.
Done full chip erase while flashing via GUI, always do.
hglrc f…
-
We'd like to be able to do real time audio filtering with CircuitPython. Example: Read from mic, perform FIR filtering with ulab, output on speaker.
We would also like to process all data from the…
-
information the title doesnt have. I have a Iflight succex F4-e flight controller. A rxsr receiver and a qx7s radio. flight controller and receiver wired for Fport betaflight configured for Fport. I r…
-
Hi,
I am trying to fuse the Mocap pose into EKF2 instead of VIO pose or GPS data. The Mocap pose update at 60Hz and it doesn't includes the velocity. For some reason at around 60 seconds+ X and Y …
-
The MJPEG video feed (or should I say HDMI input) works as long as the resolution is constant. But when the resolution changes, the HDMI indicator on the OLED screen goes out and I get either a black …
-
The Embedded Controller provides status information about the battery.
This issue collects information and code drops related to implementing a driver that can ultimately report charge level and char…
Artox updated
2 years ago