-
I've been trying to control a servo PWM motor with a Pixhawk 2.4.8, on AUX1, running PX4 v1.9.2 and ROS Kinetic, and **all** I could get was an Error LED from the Pixhawk.
This is the code:
`#includ…
-
Hey guys!
Well I have an M8N GPS that didnt worked out of the box with my pixhawk.
I got no GPS signal at all.
So I used a USBSerail bridge and connected it directly to the computer.
I used u-center …
-
I wanted to know whether dronekit support Pixhwak or Ardupilot APm mega filght controller?
ghost updated
6 years ago
-
We built an Unmanned Surface Vehicle using Pixhawk and Ping Sonar. The ping sonar will send the signal and generate my image /data through ping_viewer. However, my Pingviewer shows only a blank scree…
-
### What we have
- Pixhawk Module
- Transmitter's
- GPS
### What we need
- Camera
- Secondary board
- Frame
-
Hy all,
I have recently noticed something strange about the pixhawk 2.4.5 hardware.
One of the sensor on the pixhawk is called a LSM303D ( a 3D magnetometer and accelerometer)
I was looking at the pix…
-
we will use emlid reach gps with pixhawk in rtk mode but we can't use qgroundcontrol for sending correction from base station to UAV .
-
### Describe the bug
During the flight, my drone is doing the **YAW** sometimes CW and other times CCW automatically without sending the YAW from the RC in the Position/Altitude flight.
It remains s…
-
Hi guys,
i'm facing a very strange behavior.
I'm using a NodeMCU v2 instead of an ESP-01 and it is working quite fine with an Ardupilot at 115200.
The strange happens when i try to use it with a Pi…
-
## Expected Behavior
Autopilot should be connected via usb successfully.
## Current Behavior
We can not connect to qgc from usb. This problem only occurs with usb connection. It connects suc…
feemi updated
4 years ago