-
Currently none of the three examples compile for the Nicla Vision `arduino:mbed_nicla:nicla_vision`.
Battery.ino
[arduino-libraries/Arduino_PowerManagement/examples/Battery/Battery.ino](…
-
I'm trying to debug an issue with the Giga crashing after a number of hours running. Unfortunately, it seems a number of issues are hampering this:
- `mbed_config.h` has most values disabled includi…
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
When I run [Arduino_AdvancedAnalog](https://github.com/arduino-libraries/Arduino_AdvancedAnalog/tree/main)/[examples](https://github.com/arduino-libraries/Arduino_AdvancedAnalog/tree/main/examples)/[A…
-
Hello,
thanks for making this bootloader publicly available!
Unfortunately, the mbed distribution specified in `mbed-os.lib` does not seem to be available anymore. Building with a current ARM-distri…
-
Please add board 'Arduino Giga R1 Wifi' to the boards support list:
MCU: STM32H747XIH6, Cortex M7 480mhz
Mucho appreciated.
-
I put this code in Arduino IDE. I have an Arduino Portenta H7.
```cpp
/*
secureElement Random Number
This sketch uses the ECC508/ECC608 or SE050 to generate a random number
every second…
-
- Hardware description: esp32-s3-devkitc-1
- RTOS: FreeRTOS
- Installation type: PlatformIO
- Version or commit hash: humble
Hello, I am trying to use the two ESP32 cores to do separate task, wh…
-
When using the example to create the output.bin file, imgtool crashes.
Command
~~~sg
imgtool sign --key ecdsa-p256-signing-priv-key.pem --encrypt ecdsa-p256-encrypt-pub-key.pem input.bin output.…
-
Dear @skjafar
thanks again for your great project and all this work around this great board PortentaH7.
I have been able to connect the STLINK-V3MINIE to the Breakout-board and flash from STM32Cu…