-
Respected sir
Subject: Request for Assistance - CVA-5 Processor Simulation
I trust this email finds you well. My name is Tanishq.S, and I am a student from PES University, India. I am reaching out…
-
The "standard processor-specific block structure" described in section 2.2 does not match the "processor-specific block" defined in section 7.45.1 of SMBIOS 3.5.0.
The fields should be "block length"…
-
We are attempting to target a real platform which has memory available at certain address ranges.
We have observed that force-riscv attempts to put memory regions in the full address range of the RV6…
-
FDIV and FSQRT rounding mode calculation mismatches found when comparing the results from FPnew to a RocketChip RISCV IMAF processor.
I have attached a few examples of calculation mismatches found:…
-
I want to build boomV3 on the chipyard.
when I fellowed these steps, I met some problems.
``````
# Download the template and setup environment
git clone https://github.com/ucb-bar/chipyard.git
…
GGKOP updated
10 months ago
-
TODOs:
- [x] Run [EVM](https://github.com/powdr-labs/powdr/blob/main/riscv/tests/riscv_data/evm/src/lib.rs) in [riscv/tests/riscv.rs](https://github.com/powdr-labs/powdr/blob/main/riscv/tests/riscv…
-
I've been trying to use the latest release v0.43.1 for my ULP application. However, there seems to be an issue with the CHANGELOG.md file. The change logs for the release tag v0.43.0 mention a breakin…
-
It would be really great to have support for other ESP32 chip variants, in particular the RISC-V-baed chips. I got the first step of selecting the "esp32c3" in LoadFirmwareImage, but still need to fig…
-
### Describe the issue
I am trying to build onnxruntime for a RISCV target platform ([LicheeRV Nano](https://wiki.sipeed.com/hardware/en/lichee/RV_Nano/1_intro.html)). I have succeeded the built of l…
FZR95 updated
2 months ago
-
The ISA manual states that JALR should clear the LSB of the address:
> The indirect jump instruction JALR (jump and link register) uses the I-type encoding. The target
address is obtained by addin…