-
Hello everyone:
I use two Ublox lea-6t to testing RTKLIB on Linux,First,I use one for base station,I use str2str to transfer data from UBX to RTCM3 the command is :
./str2str -in serial://t…
-
I am currently trying to use this GPS as a sensor on my rover. I understand that this driver provides me with the GPS readings, and I can connect to the RTK without ROS. Can someone provide me a guide…
-
In [rtkpos.c](https://github.com/tomojitakasu/RTKLIB/blob/rtklib_2.4.3/src/rtkpos.c), the `slip` field of `ssat_t` is used to store the previous LLI value as well as to indicate a cycle slip. For stor…
-
I dont think it is necessary to create repro for bin/
-
I get this message when I compile 2.4.3 b24 :
/home/cpp/rtklib/RTKLIB-rtklib_2.4.3/app/rtknavi_qt/navimain.cpp:1095: erreur : too few arguments to function 'int rtksvrstart(rtksvr_t_, int, int, int_, …
-
@weisongwen Thanks for your reply, Professor Wen. It seems that I have fallen into confusion. I will list them one by one:
1、As you wrote in the MD, the results of RTK position (solution 2) will be…
-
Hi, I am rebuilding Rtknavi Qt app by VS 2013 using your latest revision (RTKLIB 2.4.3 b29) but no luck.
It said that:
"Error 3 error C2660: 'rtksvrstart' : function does not take 15 arguments \RTKL…
-
Hello,
i use RTKCONV 2.4.3 b34 to convert the raw observation file from a dji phantom 4 rtk.
The file is in rtcm3. Debug level 2
In the rtkconv.trace is this error:
2 rtcm3 1045 satellite numb…
-
Hi,
I used GNSS-SDR to process the BDS data collected by the Spirent GSS6450 signal record system. I then used RTKLib to obtain a zero-baseline RTK solution with BDS B1I measurements only. The refe…
-
The format SP3-d increases the maximum number of satellites from 85 to 999 [https://gssc.esa.int/wp-content/uploads/2018/07/sp3d.pdf]. For doing so, it uses the columns 4-6 of row 3, whereas the previ…