-
SPI is reading all 0's from the decoder attached to the Due. @DeepFriedDerp is there a chance the due clock cycle is too fast? I don't remember if we tried slowing it down or not.
The other thing …
-
Hello Both,
First of all thank you for a great piece of software! I wanted to express my thanks for a (in my opinion) solid and thought out implementation. I am trying to use Repetier FW for a DUE …
-
Hello,
I am new to communicating to serial port device, I am making a web application that communicates to a serial device, so I found your JSON Serial, I got the exe for windows, but unfortunately I…
-
Hi,
I wanted to get the "controller fan function" going with this special printer i've built.
void controllerFan() {
in MK_Main.cpp
However as with the other instances i've read online unfo…
-
Pardon the narrative....
Ever since the earliest versions of SavvyCan / GVRET I had a problem with a non working EEPROM. I was very aware this had to do with my own hardware setup (just a Due with …
-
### Environment
- OS: Windows 10, Powershell
- Remote Target: Baremetal ATSAM3X8E (Arduino Due)
- GDB: arm-none-eabi-gdb - GNU gdb (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 14.2.90.20240526-git…
-
I am using g2core on an Arduino Due to control a small cnc router, which works very well. I've compiled the firmware from the latest edge branch with a custom pinout adapted from the gShield pinount.
…
-
My project require to publish IMU topic up to **150Hz** using **Arduino DUE** using rosserial_python node_serial.py. We hooked up DUE and MPU9250 via i2c connection, and DUE transfer data stream via U…
-
Proposal to add Sam MCU support , samd/c21 offer scope for improvement over existing mega2560 in 64 or 100pin format.
The e53 versions offer compatible performance and features to the teensy 3.5 and …
-
### Test point name
[chip_sw_otbn_mem_scramble](https://github.com/lowRISC/opentitan/blob/d1676c071ab51d2f4921beaa798fe7148b890c90/hw/top_earlgrey/data/ip/chip_otbn_testplan.hjson#L101-L129)
###…