-
### Is your feature request related to a problem? Please describe.
Right now timings for servo control are hard coded but hobby servos aren't a precise devices and their set angle for specified inp…
-
I've connected exactly one Bioloid Dynamixel MX-28 servo to the ArbotiX controller. I know for a fact that the servo has ID 1 because I have written an Arduino sketch that instructs servo 1 to move, a…
-
Both HexaFloorRide (HFR) robots show an unexpected behaviour when more than about 3 servos are activated. Some of the activated servos will "shiver" or do a low speed oscillation with small amplitude …
-
See also https://forum.pimatic.org/topic/4176/rpi-cam-servo-control
-
-
Hi, i have a problem with servo´s and the dcs-bios, (Everything else works perfectlywhen i did a test with Arduino´s own servo example it works well.very well, when i try Flap meter example, it do not…
OH1CL updated
6 years ago
-
Cheap servos do not have an adjustment screw and therefore have terrible trim and throw ranges making robots limp and run circles.
-
I have a project that needs a replacement for the AX-12A servo. I would like to ask if the STS3215 has comparable accuracy in feedback and torque, and if it can replace the AX-12A. My project requires…
-
Depends on #26
-
[Camera Gimbal with Servos](http://ardupilot.org/copter/docs/common-camera-gimbal.html)
I consider myself a pretty technical savvy person, but the documentation regarding Gimbal setup completely conf…