-
I really like your project. It's teaching me tons about Arduino.
I came across this library, which I have integrated quite easily into my own version of this tracker. It slows the servos down, but al…
-
Stepper motor driver ULN2003 in simulation.
-
when coding for stepper motors, it would be very handy for have some form of limit switches logic.
**Describe the solution you'd like**
either two switches on the motor rotation able to be posit…
-
I am trying to build an ELS on an [Eisen 1340GHE](https://eisenm.com/products/eisen-1340ghe-precision-bench-lathe-with-dro-stand-1-5hp-single-phase-220v?_pos=3&_sid=4a400f9c5&_ss=r) lathe, using a [Te…
-
Hello,
I took my time to track down motors for the Kingroon KP3S (I have one, love it):
````
[motor_constants kingroon_kp3s_4223_titan]
# Coil resistance, Ohms
resistance: 4.00
# Coil induct…
-
The stepper.moveTo() commands reliably as long as I have serial commands running in the loop(). If I remove all serial.Print commands or edited out the serial.Begin() line in setup() the steppers moto…
-
Extrusion Motor was reversed after install direct from 330 update folder
-
Hi
I am getting
**Unable to write tmc spi 'stepper_x' register GLOBALSCALER**
error when I try to home steppers on SKR 3 EZ, using EZ5160 drivers
below is my printer.cfg config, pretty standard…
-
Hi, awesome work here.
but i think im looking for a control through homekit to operate a stepper motor bipolar... using DRV8825 or DM556
maybe configurable velocity or steps... or intial potitio…
-
Here's someone using `OutputDevice`: https://github.com/topshed/PiClubSushi/blob/master/17-Stepper.pdf
Edit: moved to https://github.com/topshed/PiClubSushi/blob/master/17-StepperBETA.pdf