-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
```
What steps will reproduce the problem?
1. Set "Rebuild Toolpath Before Post" to "Prompt"
2. generate toolpath
3. produce Gcode, and answer NO when CB ask to rebuild toolpaths
What is the expected…
-
Ie: perimeters.
I asked about it here without much luck for an explicit solution, though there are some pointers:
https://stackoverflow.com/questions/78359671/algorithm-for-insetting-boundary-edge…
-
I'd like to request the option to define the direction of travel on the top/bottom infill (with specific relation to Archimedean Chords) so that it is possible to define if we want the infill to be la…
-
**Application version**
latest
**Platform**
Linux mint
**Printer**
S5
**Reproduction steps**
1. slice
2. save toolpaths
3. load model and quickly delete it (workaround for another bug w…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
## Expected Behavior
The part of interest as shown below (same thing happens whether encoded as JSON or YAML), should not cause any error.
```cwl
- type:
type: enum
symbols:
…
-
Have downloaded the latest version suggested by Maria, after installation the program runs very slowly. Also after creating a design and filling out the Fabrication inputs, I get nothing no toolpath c…