-
**I have a new Green Cell Uninterruptible Power Supply UPS 1500VA 900W with LCD Display | EU VERSION aka. UPS04**
```sh
# nut-scanner -U
Scanning USB bus.
[nutdev1]
driver = "nutdrv_…
-
Hello guys,
I have installed the latest Raspbian Lite (v10 Buster) on a Raspberry Pi 2B and installed all the packages for the PiJuice board. The board is obviously installed and I powered everything…
-
Hello I have a Bluewalker UPS Powerwalker VI 2200 LCD UPS. Unfortunately, always after some time comes the following error messages:
> usbhid-ups[2387]: libusb_get_interrupt: could not claim interf…
-
Let's decide on motors.
Requirement 6mm diameter of the shaft.
What about this
https://www.robotshop.com/en/12v-12rpm-2701-gear-motor-w---encoder.html ?
-
I have followed the instructions but I am not able to get the display on the UPS hat to work.
any Ideas?
-
Hello,
After confirming the correct configuration on a bare metal machine, I am configuring `instantlinux/nut-upsd` as per the following settings on docker-compose (running on a X86_64 device):
```
…
-
Linux Mint Cinnamon 21.3
InfiniTV 4 PCIe
MythTV master v34.0
Install kernel 5.15
Install driver via dkms
MythTV works fine
Install kernel 5.19, 6.2 or 6.5
MythTV reports that tuner not avai…
-
### Distribution
Linux Mint 21.2
### Package version
nemo 5.8.5
### Frequency
Quite often
### Bug description
Could not display "computer:///".
Nemo cannot handle "computer" locations.
### St…
-
Tecnoware UPS EXA PLUS 1500
https://www.tecnoware.com/it-IT/Dettaglio/Famiglia/186
https://www.tecnoware.com/Downloads/EXA_PLUS/Manual_EXA_PLUS_1000-1500_ITA.pdf
UPSC:
```
battery.charge: 100…
-
At the moment, the log data is always stored as the average of n measurements. Instead, I would like to simply store every n'th measurement without averaging. With averaging, it's impossible to compar…