-
In case it could be helpful to someone i post here these 2.5 Gbps Ethernet adapters using the RTL8156BG chipset:
- https://www.juplink.com/products/2-5g-usb-ethernet-dragon-network-adapter
- https…
-
I wanted to test RAM, Kingston DDR4 2*8GB on a Clevo NV41MZ Laptop,
Processors: 8 × 11th Gen Intel® Core™ i7-1165G7 @ 2.80GHz
```
lspci
00:00.0 Host bridge: Intel Corporation 11th Gen Core Pro…
-
Hello everyone,
I am currently working with the Livox HAP TX LiDAR sensor and have encountered an issue where I am not receiving any TF (transform) data. Here’s a brief overview of my setup and wha…
-
Has the Ethernet micro-usb connector housing been cut down? Maybe a right-angle micro to micro usb adapter would be a good idea? Like these guys: https://www.amazon.com/Ksmile%C2%AE-Right-Degree-Femal…
-
### Description of the problem
After all hardware and software installed, the 3rd network interface would display 2500Mb/s;
But when BE-88U router reinited network interfaces or restarted by appl…
-
For the life of me I can't seem to get this thing to install on Kernel 6.8.12 with an 155H processor. Can somebody confirm whether its supposed to be supported at this juncture.
I haven't been abl…
-
I've ran the scripts but my RPi4 running Raspberry Pi OS (64-bit) does not show up as a USB ethernet device on my Mac or iPad.
I've tested with multiple USB cables.
-
### Describe the bug
I have intermittent system crashes with the following setup:
* Raspberry Pi 4B, rev 1.1, 4 GB RAM
* USB case: Axagon EE25-XA6 (ASMedia ASM225CM, enabled UASP and TRIM, USB 3.…
-
Earlier this year I learned that Banana Pi and OpenWRT were teaming up to release a low cost wifi 6 router. The board is designed by OpenWRT and will be producted and marketed by Banana Pi. Here is an…
-
I just found this WyzeHacks and I can't wait to try it.
Would it be possible to add ethernet (USB) support to the WyzeCam? For locations that don't have Wifi. Just a thought!
Keep up the good wo…