-
Did you think about adding small external MCU to switch voltage divider on/off and separate it from motor controls?
I've just bought one of this printers and was looking for a way to get rid of that …
-
Hi,
growatt integration works so that is good :)
Is there any way to control the inverter(change the mode AC source, Charge source?) The controls are available on web interface, so I guess it sh…
-
Hi! After some time of investigating problems, I found a way to coltrol frequency.
So changing boost by echo command not working, so I use Tuxedo control centre to do that and also for fan settings.
…
-
### liionpack Version
0.3.2
### Python Version
3.8
### Describe the bug
Why this is not possible?
"Charge at 1C until 4.2V",
"Hold at 4.2V until C/20"
### Steps to Reproduce
_No response_
##…
-
SVPWM is an ideal driving algorithm, but it is more difficult to implement.
-
It would be nice to have an external power source component with configurable voltage.
Can be useful for playing with different voltages, and also for simulating circuits with different power sourc…
-
I have a Nissan Leaf battery with 30 kWh and a Gen24 10 Plus. I flashed the Lilligo for the emulator and in the user settings I configured the
1.
#define NISSAN_LEAF_BATTERY
2.
#define BYD_MODBUS
…
-
Any chance to have clock/voltage control options implemented for Linux as it would benefit a lot miners on Linux.
I use Debian testing (bookworm) no need for a Mining OS for just 1 or cards.
One of …
-
Hi, I've been trying to generate equations for circuits were I need to use CCCS.
In the attached test bench I've tried to use as control source either V1 or R1.
The current flowing V1 or R1 is alw…
-
Been running Seplos bms since the start on older version.
Decided to update to the latest one and now not getting any readings just `no response received`.
Here's the snippet.
```
[20:42:24][D]…