-
Mellow's SB2040 uses XT30 plugs. As the XT30 plugs are slightly larger in size than the M12 holes, would it be possible to add a square slotted hole in the mount to allow the plugs to pass through mor…
-
### Description of the bug
After I slice an object and I want to see the "sliced info" tile on the right, i have to scroll down. When I scroll down it slows down incredibly and takes forever to scrol…
-
Hi everybody, I've adquired CNC pieces for voron 2.4 r2 and I've found that the Holes where the SB CAN is screwed does not match with the board Holes.
Any solution?
![IMG_20240430_185654](https:…
-
Hi, I wanted to reuse my Ender3's 235 bed to build a voron trident and found your repository, is your bed the same spec? The Ender bed has four screw holes but stock trident use 3 holes and mounts on …
-
Fixed some Voron trident bed models, used the original Voron cad and adjusted origins to work with Slic3r.
Added all three "stock" sizes.
[Voron-VT_bed-models.zip](https://github.com/supermerill/Sup…
-
### What happened?
When slicing dragon_nice_1 from https://www.printables.com/model/210311-articulated-spirit-dragon_-dragon_no-support_easy- , SuperSlicer 2.5.60.0 crashes (this is a regression, 2…
-
Hello, i'm French i'm a new owner of a beauty Voron 0.2 r1 pro from AE...
When i finally finish my build i make the Great Update from the interface....
then.....
[moonraker(1).log](https://github.c…
-
Hello
Can you PLEASE write simple guide for Voron trident using KISS principle? https://en.wikipedia.org/wiki/KISS_principle
Because at this moment all info was written with principle keep it F*…
-
EBB SB2209 CAN V1.0 (RP2040) + Voron Tap, suddenly unable to get Klipper to trigger the z endstop. Tried shorting gpio21 directly to gnd and no change within Klipper. Also tried connecting to gpio22…
-
### Description of the bug
I have set Travel lift > Lift height to 100mm and it doesn't work when it move from one place to another causing to hit printed parts.
![obraz](https://github.com/prusa3…