-
# A - Description
This is a feature or enhancement request to add a new serial RX protocol. This would be to enable the Yuneec Serial protocol allowing people to use their commercial Yuneec ST16, S…
-
When trying to upload a QGC plan file via fly_qgc_mission I get the below error:
```
[07:50:24|Info ] MAVSDK version: 0.21.4 (mavsdk_impl.cpp:25)
Connection URL: udp://:14550
Importing mission f…
-
seems like this repo dose not exist any more.
where can I find the android sdk required to build this example project?
-
Machine:
surface book 2
**error:**
in the startup of the software:
```
lugins loaded: CameraCalibration, CameraConnection, CameraInit, CameraLocalization, CameraRigCalibration, CameraRigLocali…
-
Circle mode as it is now is rather useless - the pilot is not able to control the diameter of the circle and the speed of copter besides via GroundStation and parameters. So for now flight by the con…
-
**Describe the bug**
I cannot be 100% sure that this also happens on master but I'm assuming this now and verify.
**To Reproduce**
Steps to reproduce the behavior:
1. Set the mission cruise speed and…
-
Hi I'm Lance from Yuneec:
**Feature Request** on pixracer
**the Racer Must support the new ESC protocol multishot, Dshot600 and Dshot1200 ( BLheli 32
firmware)**
If you can support OSD like how b…
-
This is the higher level proposal related to #1339 for how you get the various pieces of metadata which a GCS needs from a connected vehicle. I've also included my proposed spec for the parameter meta…
-
When trying to set any settings for camera I get this error:
```
[06:18:07|Error] Error: set param busy timeout: CAM_COLORMODE (mavlink_parameters.cpp:470)
failure: setSetting() CameraError(code:…
-
With the latest **Mavlink SDK v0.21.1** and a local built updated version of the **Mavlink-Swift v0.7.0** I am not able to set camera settings.
**System:**
- Xcode 10.1
- Swift 5
- iPad Mini 4 …