-
Hi,
in your talk you mentioned that you modified display_sdl.c to upscale the sdl output. I tried to place SDL_RenderSetLogicalSize(*renderer,600,600) to different places also in display_sdl_bottom…
-
@jakkra ,Hello, is it necessary to leave holes for the motor on the PCB board?
If the wire passes through the back of the hole without leaving any space for the wire, right?
-
It seems as the watch sometimes comes in a state where it thinks a popup notification is already shown and won't show the popup when new notifcations comes in.
From attaching the debugger when it h…
-
Hi，
@jakkra @Kampi
Our board voltage is incorrect, and we suspect that the MCU is broken. Then, we replaced the MCU in the NORA-B10 module with a new one and used it in VS code to download the prog…
-
The link `https://github.com/jakkra/ZSWatch/wiki/app/src/applications/template/` is wrong
Kampi updated
10 months ago
-
I think I've got a working solution for the backlight. I only get about 16 levels of brightness difference because in the 16-31 levels I don't see a noticeable change
in [app/src/drivers/zsw_displa…
-
Primary use case:
- Sharing data during a presentation
- Sharing calendar events
- Bluetooth sharing device?
- QR code to remote link?
- ... hmmm...
-
Requires ability to measure current consumotion, using for example Nordic PPK2.
Issue probably in this file: https://github.com/jakkra/ZSWatch/blob/main/app/src/zsw_cpu_freq.c
-
## Describe the bug
### The working setup
I have an application that prints a cursor on a display and rotates this cursor based on a sensor value by using this code:
**Cursor**
[iaq_img_cu…
Kampi updated
10 months ago
-
**Parts to remove**
- Remove the LiPo charger
- Remove the battery measurement circuit
- Remove reset circuit
- Remove 1.8 V regulator
- Remove 3.3 V regulator
**Features**
- Integrated battery mea…
Kampi updated
10 months ago