-
I'm using Cleanflight 1.8 and a naze32 board on one of my quadcopters. Thanks to the newest version of Cleanflight I can now log flight data to the onboard memory.
Most of the data makes sense. What d…
-
```
Hello and am a Beginner to JDrones QuadCopters and would really appreciate some
help.
1.Powered on my QuadCopter Kit and Transmitter and Lights blink. Followed the
guide on how to bind the Tran…
-
```
Dear Sir,
We are students in the Faculty of Engineering, Communication & Electronics Section, Assiut University, Egypt.
We are going to purchase one of the quadcopter you offer for an educat…
-
```
Hello and am a Beginner to JDrones QuadCopters and would really appreciate some
help.
1.Powered on my QuadCopter Kit and Transmitter and Lights blink. Followed the
guide on how to bind the Tran…
-
```
Dear Sir,
We are students in the Faculty of Engineering, Communication & Electronics Section, Assiut University, Egypt.
We are going to purchase one of the quadcopter you offer for an educat…
-
I think it can probably be made to do it... what about u?
-
Here is the concept of oneshot PWM by Felix:
"normaly MWC workes with 488Hz periodic PWM witch mans one PWM cycle takes ~ 2.2ms and the value that need's to be send can just be updated after each cy…
-
Hi guys, got a new problem.
I open one terminal, run 'roscore' to initialize ros and get it running.
Open terminal two, run 'rosrun ardrone_autonomy ardrone_driver' to get the module running.
Open te…
-
```
1.Moving the sticks on the Transmitter shows appropriate changes in the bars on
the Mission Planner Software. But no effect on the QuadCopters Motors.
2.I did a calibrate radio and moved the left…
-
```
1.Moving the sticks on the Transmitter shows appropriate changes in the bars on
the Mission Planner Software. But no effect on the QuadCopters Motors.
2.I did a calibrate radio and moved the left…