-
These are now supported in modern Arduino chipsets. here's an examples of how to create multiple I2C/SPI peripherals.
https://github.com/adafruit/ArduinoCore-samd/blob/master/variants/grand_central_m…
-
Hello! This is the request to add an RPI Pico board compatibility,
I have been trying to use the RPI Pico board as an i2C slave instead of Arduino boards. RPi Pico seems to be a reasonable alternat…
-
When using background threads to read the sensors and the main thread to update the screen the board hangs.
A simple program like this hangs after few seconds:
#include
#include
#include
#…
-
This library works well when the circuit is isolated but when I am integrating this with my complete system it shows random values. I am using Nucleo F746ZG microcontroller. Also when I replace this …
-
According to the documentation, if the Service and Characteristic UUIDs params are left to default (or are set to unknown) then the launchServiceDiscovery call should return ALL services and character…
-
### Description of defect
The Implementation of USBKeyboard and USBMouseKeyboard are limiting the transferrable keys to 6. (6-key-rollover aka 6-KRO).
This is a mostly unnecessary limitation…
-
### Description of defect
I am trying to make a LoRaWAN network using Mbed OS stack. I have noticed some differences between LoRaPHY tx and rx:
In FSK mode [`rx_config`](https://github.com/ARMmb…
-
I found some code improvements:
in the header arduino::Stream& is used. some arduino cores do not have stream under the arduino namespace (teensy for example)
Stream is usually used directly:
`v…
-
**Any XIAO SPI to any other XIAO**
Presently data is not moving between the boards.
@LynnL4
Background: The XIAO only has 10 pins most other boards have 20-40 pins. Many large projects need …
-
I'm attempting to run the `OTA_Qspi_Flash_Ethernet.ino` example on my Portenta Machine Control device but receive a `Arduino_Portenta_OTA::begin() failed with error code -3` on startup. I've updated t…