-
The pocketCHIP exposes the i2c-2 pins but not i2c-1 so changing the default to i2c-2 would it possible to use J5 i2c on the pocketCHIP.
Also /dev/i2c-1 is not available on Headless 4.4.
```
chip@chi…
bbx10 updated
8 years ago
-
```
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-app-shadowsocksR:
* kmod-ipv6 *
* opkg_install_cmd: Cannot install package luci-app-shadow…
-
Hi ,
while reading the data from the HTU21D-F the for both temperature and humidity the first byte is OK , but the second and third bytes are "0xFF"
-
### Configuration
**Operating system**: kubuntu 16.04
**PlatformIO Version** (`platformio --version`):
PlatformIO, version 2.11.0
### Description of problem
After updating platforms and libs, Ardu…
euphi updated
8 years ago
-
https://steelcityelectronics.com/2015/02/15/dew-point-htu21d-humidity-sensor/
-
Hi Maxwell,
I have installed and am testing node-red on raspberry-pi B. Having followed your instructions, I start Node Red and get this error (using -v).
[htu21d] Error: Cannot find module './build…
jamms updated
8 years ago
-
https://github.com/Ibuprofen/wx-device01/tree/bluz_wx_shield_sd
This is using the sparkfun photon weather shield and an SD card directly wired into the SPI bus of the bluz.
The first iteration of th…
-
The picture for HTU21D circuit shows that it can accept 5V Vcc.
https://github.com/rwaldron/johnny-five/blob/master/docs/breadboard/humidity-htu21d.png
However, as the specification for it, the max i…
-
Hello guys, I found an issue (and corresponding Fix ;) in hardware/I2C.cpp file:
In both ReadInt(), WriteInt() methods, "read_reg" array is declared inside a local block.
So the reference is lost whe…
-
I would like to add support for the [Grove - Temperature & Humidity Sensor](http://www.seeedstudio.com/wiki/Grove_-_Tempture%26Humidity_Sensor_%28High-Accuracy_%26Mini%29_v1.0) that is included in the…