-
To be brief, I was wondering how Moppy could be extended to be used directly with stepper motors. I am currently using 4 NEMA-17 Stepper Motors with an Arduino and 2 Adafruit Motor Shields. Has anyone…
ghost updated
7 years ago
-
I am making a PNP CNC, and have the X & Y axis running on 24V from a GRBL shield, but the rotating vacuum nozzle stepper motor that I have requires just 3.3v and my Z axis requires 5V. How do I go abo…
-
Hi I cannot seen to get the simple example to compile I get the following error
use of deleted function 'TMC2208Stepper::TMC2208Stepper(uint16_t, uint16_t, float)'
0; i--) {
digitalWrite(…
-
Seeing as this seems to be the only repository of knowledge about this board I thought I'd provide the pinout I've probed from my board. Labelled as Developower V2.0. Has a transistor output rather th…
-
Hi,
I've been chatting with someone at MKS sales and they say it's my own fault that I have damaged my driver by hitting an endstop.
Q8 Q10 and Q11 have lets the magic smoke out and vapourised t…
-
[FR] Single Nozzle, Shared Extruder Stepper, Single Servo, 8 Filaments
Hello, I have an FDM 3D Printer with 8 Filaments selected by one 300 degree hobby servo and one shared planetary geared extrud…
-
Good day James.
Please are you able to assist me.
I am struggling to get my Leadscrew sorted out. With the coding of the correct hmm setting and microsteps
I have the following components:
…
-
With these parameters .040 feed just barely moves. I can up stepper microsteps alot and get things moving but even setting microsteps to 36 and changing resolution to 400 in the program and on the dr…
-
Is it true there is a issue with TMC2209's drivers overheating on this board?
-
Why, always geting this... either it is on Z or E or Y, seems random. But same error... so sick of it. So much wasted print time and plastic!!
Two brand new ender 5 plus with klipper, and two new …