-
Is it true there is a issue with TMC2209's drivers overheating on this board?
-
good day i am enjoying this info you share!
i have experience with steppers and power systems through
3d printing and cnc, this is the first sim rig i am building
i am building a sim wheel myse…
-
Hello everybody,
i have a non-pro SKR V1.3 and FYSETC TMC2209 V2.1 stepper drivers, the board is flashed with the marlin fw.
All jumpers below the stepper drivers are removed, the UART Jumpers ar…
-
I use EBBSB 2209 ，how to solve it
Transition to shutdown state: TMC 'extruder' reports error: GSTAT: 00000001 reset=1(Reset)
-
The firmware of S42B v2 can be found here:
BIGTREETECH-Stepper-Motor-Driver/S42B/firmware/
I flashed it using stlink but it is not working (motor is not spinning correctly). I also compiled it fro…
-
I see you have plans to go for a teensie 4.0 for better performance. I do think you want a teensie 4.1 as it can act as USB peripheral (useful for make it an actual controller).
But the whole proje…
-
## Current Behaviour
Stepper motor driver DRV 8825 not loading correctly when I export as SVG (Schematic). As BreadBoard is visivle but with white background.
![image](https://github.com/fritzing…
-
Hello,
I have an ortur 4 with skr 1.3 motherboard.
On Y I have install MKS-SERVO42C with success on a nema 17 39mm.
Then I have install the MKS-SERVO42C on a nema 17 60mm and the issue start …
-
Hi,
I have just finished my upgrade of a Geeetech i3 Pro B with an SKR 1.3 with TMC2130 stepper drivers. The hotend works, and the heatbed works, but I can't get any of the stepper motors to move. …
-
Hi all, I'm just getting started with building a CNC with G2 as the motion controller. I've built other CNC systems before on larger machines, so I'm pretty comfortable with the hardware/electrical en…